100 Gallon Emergency Water Storage Container
Contact us for pricing:
(877) 333-TANK (8265)
100 Gallon Emergency Water Storage Container
Capacity: 100 Gallons
Size: 30"D x 42"H
Weight: 38 lbs.
Ships From: Austin, TX
100 Gallon Emergency Water Storage Container - Poly-Mart manufactures a line of Emergency Water Storage Containers equipped with all the necessary fittings needed to store an emergency drinking water supply at home. Many families elect to store water in their garage, basement or empty closet in anticipation of Hurricanes, Earthquakes, Power Outages or an unexpected Contaminated City Water Supply. Storing potable drinking water is usually at the top of the list in practical emergency preparedness. Poly-Mart Emergency Water Storage Containers enable you to store water outdoors as well! If storing water outdoors, select our Black or Dark Green color to block algae growth from occurring inside your Container. These two Container colors block all UV Rays from penetrating the plastic since the material has been through a process called "compounding". If you would like a color other than Dark Green or Black, but still want your Emergency Water Storage Container to block all the sunlight, check out our SunShield Emergency Water Storage Containers!
Poly-Mart Emergency Water Storage Tanks are made from FDA/NSF Approved, Food-Grade, BPA-Free Polyethylene and has built-in UV Inhibitors to avoid color fading and breakdown from harsh sunlight. Plan on getting several decades of life out of a Poly-Mart Water Storage Container even if kept in the full sun! The Poly-Mart 100 Gallon Emergency Water Storage Container is made in Austin, TX and is available in a wide variety of colors.
Poly-Mart Emergency Water Storage Containers are also available in the following gallon capacities: 125, 150, 200, 250, 500 and 1150 gallons. These Containers all come equipped with (2) factory-installed 3/4" Polypropylene Bulkhead Fittings and ship with (1) 3/4" Lead-Free Brass Spigot and (1) 3/4" Lead-Free Brass Ball Valve Assembly. The Brass Ball Valve Assembly is used at the base of the container and can be used for filling or draining. The other is located 14" off the ground and off-centered from the fill/drain fitting so that there is never any interference when filling a 5 gallon bucket or pan with water.
100 Gallon Emergency Water Storage Container by Poly-Mart Features:
- 5 Year Warranty
- FDA-Approved, Food-Grade, BPA-Free Polyethylene
- NSF-61 Approved High Density Polyethylene (HDPE)
- Resin Complies w/ Kosher Dietary Laws
- UV Rated to last several decades in the Full Sun
- 100 Gallons (110 Gallon of Total Capacity)
- 30” Diameter x 42” Height
- Comparable in capacity to (2) 55 Gallon Drums with only 30" of Floor Space
- 38 lbs empty and 954 lbs full of water
- 8" Standard Tank Lid with Air Vent
- 3/4” Raised Bulkhead Fitting for Filling a Pot or Pan
- 3/4" Bulkhead Fitting with Plug for Hose Install or Drain
- (1) 3/4" High Quality Lead-Free Brass Water Hose Spigot
- (1) 3/4" High Quality Lead-Free Brass Ball Valve Assembly
- 4 Dome Flats & 4 Bottom Flats for Optimal Tank Customization
- Upgrade to (2) 3/4" Stainless Steel Lockable Ball Valve Assemblies available
- Part Number: PM100E
- Made in Austin, TX
Included Hardware Installation:
Make sure to apply thread tape to all threads of all included brass hardware prior to installing them into your tank fittings. Be sure to wrap your thread tape against the grain of the threads and be sure to only wrap 2 revolutions. Too much thread tape can Thread Tape (Teflon Tape) is not included. Install slowly to avoid the chance of cross-threading the tank fitting. There is no need to tighten the nut on the tank fitting. Fittings come tightened to the manufacturer's recommended tightness.
3/4" Stainless Steel Lockable Ball Valve Upgrade Option:
If you select this option, your tank will come with two 3/4" Stainless Steel Lockable Ball Valve Assemblies in replacement of the above pictured Brass Hardware. Stainless Steel is less corrosive, higher quality, doesn't rust and is great for drinking water. However most importantly, this option will allow you to lock your valves with a standard pad lock (pad locks not included). Whether you're trying to deter curious children from emptying your water supply or keep someone else from using it, this is a great option to consider.
***Our site will not calculate accurate freight rates on 100 gallon tanks for quantities of 4 or more. Please call 877-333-TANK (8265) or email firstname.lastname@example.org for a Freight Quote. If you want to pick up your tank(s) at Poly-Mart, select "Will Call at Poly-Mart" at checkout. We'll beat any written freight quote on a Poly-Mart Tank!
*If complete FDA Approval is preferred for your application, please select Light Blue, Dark Blue, Dark Green, Light Green, Black or Natural as your color
Part Number: PM100E